Now Available Worldwide

Mobile Pallet Changer - Side Press

The Mobile Pallet Changer - Side Press offers a dynamic solution for seamless pallet transfers. This device employs lateral pressing technology to secure products during the switch, minimizing damage and ensuring stability.

Get Free Quote Watch Demo

CE Certified

ISO 9001

2 Year Warranty

98%

Efficiency Rate

2 Year

Full Warranty

Mobile Pallet Changer - Side Press

Visual Details

Click to enlarge

Mobile Pallet Changer - Side Press - Detail 2

Click to enlarge

Mobile Pallet Changer - Side Press - Detail 3

Click to enlarge

Mobile Pallet Changer - Side Press - Detail 4

Click to enlarge

See It In Action

Watch How It Works

Discover how our automated packaging solutions optimize your production line efficiency. This video demonstrates the seamless operation designed for maximum protection.

High Throughput

Up to 60 coils per hour

Consistent Quality

Every wrap meets spec

Request A Quote

Product Overview

The FHOPE Mobile Pallet Changer – Side Press is a mobile, dual-platform pallet changer that transfers loads between pallets by lateral side pressing, without rotation, inversion, or tilting. It clamps the goods from both sides with adjustable pressure, lifts them clear of the old pallet, and sets them down on a new one.

The machine travels to the load, allowing pallet exchange where the goods stand. A representative configuration handles approximately 1500 kg and pallets up to 1200 mm wide, with a 24V battery system and built-in charger as standard.

Representative Configuration

Key Specifications

Representative configuration; not all values are committed simultaneously across all builds.

Item	Specification
Load capacity	Approx. 1500 kg
Pallet width capacity	Up to 1200 mm
Internal leg width	1320 mm (within main frame)
Adjustable min. compression height	320 mm
Power input	120V / 24V 20A
Drive motor	24V, 1200W, 65A
Battery	(4) × 6V, built-in charger standard
Material	Steel
Color	Black / Yellow
Machine dimensions (representative footprint)	2800W × 1500L × 1500H mm class; GA drawing confirmed per project

Chassis & Fork Assembly

Representative chassis and fork specification:

Item	Specification
Load capacity	1500 kg
Power	24V
Lowered height	83 mm
Fork width	150 mm
Fork opening	813–1600 mm
Fork length	914 / 1220 mm
Lift motor	1200 W

Optional attachments are available; final configuration is confirmed per project.

See More Data for safety, RFQ items, limits, and FAQs.

Operating Sequence

How It Works

The side-press pallet changing cycle follows five operating steps:

Position

Move the machine to the load requiring a pallet change and align it with the pallet.
Clamp

Start the two side platforms from the control panel; they press inward laterally to hold the load on both sides.
Adjust pressure

Use the pressure gauge to regulate clamping force so fragile or crush-sensitive products are held securely under controlled pressure.
Lift and transfer

Raise the clamped load clear of the old pallet, then move it to the new pallet position. Synchronized fork movement is designed to maintain load stability during travel.
Release

Lower the load onto the new pallet, open the side platforms, and complete the exchange.

No rotation or inversion is involved. A representative cycle is estimated at 60–90 seconds depending on load, travel distance, and operator handling; actual cycle time is confirmed per project.

Product Family

Related Machines

More Data

Technical & RFQ Data

Protection & Control

Safety & Operation

Set pressure before lifting

Set clamp pressure with the pressure gauge before lifting, matching the force to the product type.

Synchronized fork movement

Synchronized fork movement is designed to maintain load stability and reduce risk under regulated pressure during transfer.

Onboard control panel

Clamping, lifting, and travel are all controlled from the onboard control panel.

Battery and daily checks

The 24V battery system has a built-in charger. Follow the supplied operating manual for charging procedures and daily checks.

Operator training

Operators should be trained on alignment, pressure setting, and load assessment before independent operation.

Engineering Input

Five RFQ Items

Provide these five items for an accurate per-project quotation:

Load characteristics

Typical weight, dimensions, product type, side-pressure tolerance, product side-surface flatness, and load containment requirements.

Pallet details

Pallet type, width and length, and the condition of outgoing pallets, such as damaged or hygiene-replacement pallets.

Throughput and location

Expected pallet changes per shift, and whether the exchange point moves or remains fixed.

Site conditions

Floor condition, maneuvering space, aisle widths, and charging power; the representative configuration uses 120V input.

Optional requirements

Attachments, 914 or 1220 mm fork length preference, color scheme, and documentation needs.

Application Check

When It Fits

Choose this machine when your selection criteria match these conditions:

Condition	Why the Side-Press Mobile Changer Fits
No rotation or inversion	The side-press method holds goods from both sides and transfers them horizontally without tilting the product.
Variable exchange locations	The machine travels to the load, so pallet changes can happen where the goods stand rather than at a fixed station.
Wide pallet-surrounding access	The wide-base frame with 1320 mm internal leg width allows the machine to work around the pallet perimeter.
Fixed installation preferred instead	If the exchange point is permanent and throughput justifies an installed unit, a stationary machine is typically the better match.

Application Boundaries

Limits to Check Before Ordering

Load self-support required

The side-press method clamps the load laterally. Loads must support themselves under side pressure; bagged, loose, or unstable stacks may need assessment before specification.

Representative parameters

The 1500 kg load class, 1320 mm internal leg width, and 320 mm compression height are representative values. Actual capacity, footprint, and dimensions are confirmed per project via the GA drawing.

Pressure-sensitive goods

Clamping force is adjustable via the gauge, but products with very low side-pressure tolerance should be evaluated case by case.

Common Questions

FAQ

1. How does a side-press pallet changer differ from a 180° pallet inverter?

A side-press machine clamps the load from both sides and transfers it horizontally to a new pallet, with no rotation or inversion. A 180° inverter rotates the load together with its pallet to exchange the pallet by turning it over.

2. What happens if my product cannot be pressed from the sides?

Clamping pressure is adjustable via the pressure gauge, so force can be reduced for sensitive goods. However, the load must be self-supporting under lateral pressure; otherwise, another method should be evaluated per project.

3. What load and pallet size can it handle?

The representative configuration is rated for approximately 1500 kg and accepts pallets up to 1200 mm wide. Final ratings are confirmed per project based on the actual load and pallet.

4. Why is the internal leg width of 1320 mm significant?

The wide-base frame allows the machine's legs to work around the pallet perimeter, so the machine can approach and service loads without the legs interfering with the pallet footprint.

5. How is the machine powered?

The representative configuration runs on a 24V battery system with four 6V batteries, a 120V input, and a built-in battery charger supplied as standard.

6. What warranty applies?

Warranty coverage and service terms are specified in the commercial quotation and sales contract per project.

7. What are the machine's dimensions?

The representative footprint is in the 2800W × 1500L × 1500H mm class. Exact dimensions depend on the build and are confirmed per project with the GA drawing.