The coil packing steps for steel coil package by paper

Dear Yoki,

Remember to get the below respond from client for covering equipment, Accessible specifics has become additional

“Quote

1. In order to move forward with new proposal, we require primarily some paperwork and clarifications the following:

1.1 Quick Explanation of the Range of Works.

To bring along and protected the coils with related load up computer code according to the condition of the client.

1.2 Quick explanation of the genuine manual wrapping functioning series and covering materials used throughout the covering method for:

? Community packaging

ü Minimize VCI document as per condition of the coil.

ü Lift coils by EOT crane from production region towards the loading area.

ü Put the coil on VCI packaging papers.

ü Place VCI packing papers at interior diameter from the coil and paste paper with masking adhesive tape at interior size ends of the coil.

ü Envelop document with masking adhesive tape in the external size from the coil.

ü Retract VCI document on eye paste and side with masking tape at internal diameter of the coil.

If covering on both eye sides of the coil from outer diameter to inner diameter properly, ü Check VCI paper.

ü Set carton edge guard at outer and inner diameter from the coil combined with inner metallic page.

ü Insert the galvanized internal diameter ring at internal size in the coil on sides.

By using pneumatic / battery operated polyester strapping tools, ü Use polyester strap and.

ü Put galvanized metallic edge protector at external diameter sides from the coil on both edges.

ü Protected the edge covers by having a single (1) circumferential Polyester straps by making use of pneumatic strapping resources.

ü Make 4 (4) eye straps of plastic material bands utilizing pneumatic strapping tools.

? Export packing

ü Cut VCI paper and metal sheet depending on condition of the coil.

ü Elevate the coils by EOT crane from manufacturing location to the packing region.

ü Envelop VCI paper with masking adhesive tape on outside size from the coil.

ü Envelop coil with galvanized steel outer diameter sheet and make one outer steel strap & metal seal along with plastic pad by using strapping tools.

ü Return the coil towards the packing area by EOT crane.

ü Place VCI packaging paper at internal size in the coil and paste it with masking adhesive tape.

ü Retract VCI paper on eyesight side and paste with masking adhesive tape at inner size of the coil.

ü Check paper if covering on both eye sides of the coil from outer diameter to inner diameter properly.

ü Put carton advantage protector at outer and inner diameter from the coil combined with internal metallic sheet.

ü Place galvanized metal part deal with together with the galvanized inner size engagement ring for both eyes ends of the coil.

ü Set galvanized metal advantage protector at outer diameter edges of the coil for both ends.

ü Secure the edge covers with a single (1) circumferential steel straps & metallic close off together with plastic mat utilizing strapping tools.

ü Make 4 (4) eyesight metal straps & metal close off in addition to plastic mat using pneumatic strapping device.

You may also like...